Selection of Heat Exchanger Plates
Release Time:
2025-08-31
After confirming the heat exchanger area, the plate needs to be selected. Currently, most heat exchanger manufacturers use herringbone corrugated plates. A few use flat corrugated plates. Generally, herringbone corrugated plates can withstand higher pressure. Additionally, the heat transfer coefficient of herringbone corrugated plates is higher than that of flat corrugated plates. Therefore, when the heat exchanger has high pressure or requires a high heat transfer coefficient, herringbone corrugated plates are needed. When the heat exchanger has a low heat transfer coefficient and pressure resistance and requires system resistance, flat corrugated plates should be selected.
Latest News
Installation foundation of the heat exchanger
The installation foundation for manufacturing heat exchangers is mainly used for the horizontal installation of the heat exchanger, the connection of pipelines, and the future maintenance of the heat exchanger.
Precautions during routine inspection of the cooler
Mentioning air coolers, they are seen relatively less in our daily lives, but they still have very important uses in some industries or large-scale buildings. There are many things to pay attention to during the regular inspection of coolers. So, what exactly needs to be noted? Please follow the professional technical staff below for an introduction.
Selection of Heat Exchanger Plates
After confirming the heat exchanger area, the plate needs to be selected. Currently, most heat exchanger manufacturers use herringbone corrugated plates.
Contact: Gu Chunzou
Mobile Phone:+86-15190905678
Contact Phone:+86-513-83208320-109
Email:15190905678@163.com
Company Address: No. 28 Haiquan Road, High-tech Zone, Jinhai Town, Qidong City, Nantong City, Jiangsu Province